Retractable bench seating
Design Parameters:
No |
Item |
Design Parameters |
1 |
Bottom wheels load |
≥350Kg/set |
2 |
Structure static load |
Longitudinal≥450kg/㎡, |
Lateral≥200kg/㎡ |
||
3 |
Steps static load |
≥400kg/㎡ |
4 |
Step depth |
900mm |
5 |
Step height |
300mm Bottom step 350mm |
6 |
Passageway width |
1000mm |
Material Specification:
Type |
Name |
Specification |
Tech Brief |
Usage |
Seating |
JY-8700 |
Bench type |
Hollow blow molding, front display |
Seating |
Platform |
C steel |
180×60×30×2.5 mm (folding formation) |
QB standard, lacquer enamel |
Main Beam |
Platform |
Rectangular pipe |
100×50×2.5 mm |
QB standard, painted |
Main supporter |
Platform |
Rectangular pipe |
50×40×2.0㎜ |
QB standard Anti-rust dealt |
Beams of main supporter |
Platform |
Square pipe |
40×40×2.0㎜ |
QB standard Anti-rust dealt |
Beams of main supporter |
Tech and patents:
JY8700 retractable bench seating are under the protection of many Chinese patents, include
No 202010455640.7 a high stable automatic control moveable spectator platform,
202010456915.9 an intelligent power out system and its control way of a telescopic platform,
201922103024.0 the telescopic device of retractable moveable seating,
201922103078.7 a retractable seating whose whole rows can be foldable,
201922103004.3 the foldable handrails of the telescopic platform, 201922103026.X a retractable seating with foldable writing pad,
201922103034.4 a retractable seating with metal shell,
201922103967.3 a whole row chair with backs.Please notice that all our retractable seating or telescopic seating are under the protection of Chinese patents. Not only the direct description within the patent documents, but also all other deformations, sub-usage all under the protection of those patents.
Installation process:
First step: put 6pcs of the shape like "上" on the floor, and put the cross beam on the first shape like "上",use inner hexagon screw fixed of them, please do not tighten up, when all parts can be fixed, then fasten it.
Second step: put the shape like "7" frame between of two shape like 1 frame by M8x20 mm screws.
Third step: need to fixed end of left and right used "shape like U", by M8x20 mm screws,there are just used in first row.
Fourth step: in the same way,put the second shape like 上 together with the first row,and then put cross beam on the second shape like "上",and put shape like "7" frame between shape like "上".
Sixth step: angle iron fixed on the behind.
Seventh step: pull stand open.
Eighth: fixed the board on the frame,and cover the carpet on the board ,the edge used aluminum material.
Fixed pull handle on the first row.
Email or call for free display drawing and sample!
http://www.geseating.com/